Thermodynamics Lab Equipment

SINGLE CYLINDER FOUR STROKE PETROL ENGINE TEST RIG

Type of Engine : Single cylinder, four stroke, air cooled, Hand start, self Lubricating, petrol engine. Type of Loading : TD-102A- Rope Brake Dynamometer TD-102D- Eddy Current Dynamometer Fuel Measuring System: Fuel measuring system consists of a fuel tank, a burette and a three way cock. Air Intake Measuring System: Air tank fitted with orifice and water manometer. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is well designed and supported by a good quality painted rigid M.S. Structure. SERVICES REQUIRED Petrol : 5 litters Water Supply: Continuous water flow of 10LPM at ½ kg/cm2 Pressure if Calorimeter is ordered. Power Supply : 230V AC, 5 Amp socket with earth Floor Space : 2m x 1 m Tachometer : For RPM measurement.

Computerised 1 Cylinder 4 Stroke Diesel Engine Test Rig (With Data Logging Facility)

Type of Engine : 1 Cylinder, 4 Stroke Water Cooled Diesel Engine Type of Loading : Eddy current Dynamometer Air Intake Measuring System : Air tank fitted with Air Flow Transmitter Fuel measuring system : Fuel measuring system consists of a fuel tank, Fuel Sensor. Combustion Pressure Sensor : Piezoelectric Sensor. Crank Angle Sensor : Resolution 1°. Torque Measurement : Load Cell with Transmitter. Temperature Sensor : Temperature Sensors with Transmitters. Water Flow Measuremen : By Rotameters for engine and calorimeter Exhaust Gas Calorimeter : Pipe in pipe type made of Stainless Steel, insulated with ceramic wool and aluminum cladding Engine Interface : Load Transmitter,Temperature Transmitter,Air Flow Transmitter, Fuel Flow Transmitter, Combustion Pressure Sensor, Crank Angle Sensor. An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus. The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. SERVICES REQUIRED Continuous Clean and Soft Water Supply @ 300 LPH (max.) for engine and calorimeter. Provide ½” BSP size connection. Fuel: 10 Ltrs. Per run Lubricating Oil: 5 Ltrs. Electric supply 220V AC, 50 Hz, 5-15 Amp. Combine Socket, Single Phase Computer System: i-3 processor with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for Card.

SEPARATING & THROTTLING CALORIMETER

Separating Chamber : Compatible capacity made of Stainless Steel insulated with Ceramic wool with water level indicator. Throttling Chamber : Compatible capacity provided with gauge to measure inlet Pressure before throttling. Heat Exchanger : For Condensing steam after throttling chamber. Steam Generator : Compatible capacity with digital temperature controller to control the temperature inside the steam generator. Differential pressure Measurement : By manometer. Steam pressure measurement: By Pressure gauge. An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus. The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. SERVICES REQUIRED Electric Supply: Single Phase, 220 V, 10 Amp. Continuous Water Supply: 10 LPM Approx. at ½ kg/cm2 pressure.

SINGLE CYLINDER TWO STROKE PETROL ENGINE TEST RIG

Type of Engine : Single cylinder, two stroke, air cooled, Manual start, self lubricating, petrol engine Type of Loading : TD-101A - Rope Brake Dynamometer Torque Measurement : By Brake Drum and spring balances TD-101D - Eddy Current Dynamometer Torque Measurement: By spring balances Fuel Measuring System: Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. Air intake Measuring System: Air tank fitted with orifice and manometer. Exhaust gas calorimeter: An Exhaust Gas Calorimeter, made of Stainless Steel will be provided for calculating heat carried away by exhaust gases. The body of the calorimeter is insulated with ceramic wool and cladded by Aluminium foil. Digital Temperature indicator with Temperature sensors at appropriate position will be provided. RPM measurement: RPM Indicator with Proximity sensor. Temperature Measurement : Digital Temperature Indicator with multi-channel switch Temperature Sensors : Thermocouple (4 nos.) Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is well designed and supported by a good quality painted rigid M.S. Structure. SERVICES REQUIRED Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 amp. Combined socket with earth connection. Water Supply: Continuous @5LPM at 1 Bar pressure. Floor Drain required Petrol : 5 liters 2T Engine Oil : 2% of Fuel Engine Oil : SAE 20W40; 500 ml (approx.) Exhaust Emission Floor Area: 2m x 1 m.

SINGLE CYLINDER TWO STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE DYNAMOMETER

Type of Engine : Single cylinder, two stroke, air cooled, Manual start, self lubricating, petrol engine Type of Loading : TD-101A - Rope Brake Dynamometer Torque Measurement: By Brake Drum and spring balances TD-101D - Eddy Current Dynamometer Torque Measurement: By spring balances Fuel Measuring System : Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. Air intake Measuring System: Air tank fitted with orifice and manometer. Exhaust gas calorimeter : An Exhaust Gas Calorimeter, made of Stainless Steel will be provided for calculating heat carried away by exhaust gases. The body of the calorimeter is insulated with ceramic wool and cladded by Aluminium foil. Digital Temperature indicator with Temperature sensors at appropriate position will be provided. RPM measurement: RPM Indicator with Proximity sensor. Temperature Measurement : Digital Temperature Indicator with multi-channel switch Temperature Sensors : Thermocouple (4 nos.) SERVICES REQUIRED Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 amp. Combined socket with earth connection. Water Supply: Continuous @5LPM at 1 Bar pressure. Floor Drain required Petrol : 5 litters 2T Engine Oil : 2% of Fuel Engine Oil : SAE 20W40; 500 ml (approx.) Exhaust Emission Floor Area: 2m x 1 m.

Separating And Throttling Calorimeter

Petrol Engine Test Rig

FOUR CYLINDER FOUR STROKE PETROL ENGINE TEST RIG

Engine : Multi Cylinder, Four stroke, water cooled Petrol Engine Type of Loading : – Hydraulic Brake Dynamometer Eddy Current Dynamometer Rope Break Dynamometer Fuel Measuring System: Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. Air Intake Measuring System: Air tank fitted with orifice and water manometer. Measurement of Heat Carried: It consist of inlet outlet piping with flow control valve, water Away by Cooling Water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet Temperature Measurement : Digital Temperature Indicator with multi-channel switch Temperature Sensors : RTD PT-100 type Panel Board Arrangement : Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for Morse test. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Electric Supply: Single Phase, 220 V, 10Amp. Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer Fuel : 20 Ltrs. (Petrol) Floor Area : 3m X 2m Tachometer : For RPM measurement Battery Unit: 12 Volt 88 Amp.

SINGLE CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG

Type of Engine : Single cylinder, four stroke, vertical water cooled, crank start, Diesel engine developing 5 HP at 1500 Type of Loading: TD-104A - Rope Brake Dynamometer Electric Brake Dynamometer Hydraulic Brake Dynamometer Eddy Current Dynamometer Fuel Measuring System : Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. Air Intake Measuring System: Air tank fitted with orifice and water manometer. Measurement of Heat Carried: It consists of inlet outlet piping with flow control valve, water Away by Cooling Water meter and temperature sensor. Temperature Measurement : Digital Temperature Indicator with multi-channel switch Temperature Sensors : RTD PT-100 type. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is well designed and supported by a good quality painted rigid M.S. Structure. SERVICES REQUIRED Electric Supply: Single Phase, 220 V, 10Amp. Continuous Water Supply: 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer Fuel: 20 Ltrs. Diesel Floor Area : 3m X 2m Tachometer : For RPM measurement.

FOUR CYLINDER FOUR STROKE PETROL ENGINE TEST RIG

Engine : Multi Cylinder, Four stroke, water cooled Petrol Engine Type of Loading : – Hydraulic Brake Dynamometer Eddy Current Dynamometer Rope Break Dynamometer Fuel Measuring System: Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. Air Intake Measuring System: Air tank fitted with orifice and water manometer. Measurement of Heat Carried: It consist of inlet outlet piping with flow control valve, water Away by Cooling Water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet Temperature Measurement : Digital Temperature Indicator with multi-channel switch Temperature Sensors : RTD PT-100 type Panel Board Arrangement : Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for Morse test. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Electric Supply: Single Phase, 220 V, 10Amp. Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer Fuel : 20 Ltrs. (Petrol) Floor Area : 3m X 2m Tachometer : For RPM measurement Battery Unit: 12 Volt 88 Amp.