Call : +918068210873
Home » Products » Strength of Material Lab Testing Equipment

Strength Of Material Lab Testing Equipment

ROCKWELL-CUM-BRINELL HARDNESS TESTER,CAP: 250Kg
close
ROCKWELL-CUM-BRINELL HARDNESS TESTER,CAP: 250Kg
STSOM-23
Specification:- These testers are simple in design and easy to operate for indenter type , still yet quite sensitive and accurate. Various models from the wide range are available for institutes, Quality control laboratories, Tool-Rooms, Heat Treatment Dept. R& D Laboratories etc.
Price : 35000 INR
BRINELL HARDNESS TESTER, CAPICITY 300 Kg
close
BRINELL HARDNESS TESTER, CAPICITY 300 Kg
STSOM-22
SPECIFICATIONS: Mains supply 415 V, 50 Hz, 3 ph Drive motor 0.33 HP Net weight approx 325 Kg Size of base 380*740 mm
Price : 35000 INR
PORTABLE BRINELL HARDNESS TESTER
close
PORTABLE BRINELL HARDNESS TESTER
STSOM-21
DESCRIPTION: Sleek & handy design, comes in a slim briefcase, for carrying the machine. Mainly used to check hardness in confined spaces, on large & heavy components, permanently installed parts with low test expenditure. The machine has built in conversion facility for given material to convert ‘D’ value to Vickers (HV), Rockwell (HRB, HRC), Brinell (HB), UTS scales which can be selected by pressing arrow keys. Five numbers of probes D, G, SH, EX & C can be given in different combinations. Upto 100 readings can be stored in memory of the machine for printing purpose. Automatic calibration facility of probe is available through keyboard. Extra (Optional) Accessories such as – Standard test blocks, support rings, printer, serial interface, different types of probes are available.
Price : 15000 INR
POLDI HARDNESS TESTER
close
POLDI HARDNESS TESTER
STSOM-20
SPECIFICATIONS: MATERIAL ALLOY STEEL DIA 30 MM LENGTH 85 MM TUNGSTEN CARBIDE BALL 10 MM DIA SIZE 12mm x 12mm x 150mm EYE PIECE 8 X BRINELL MICROSCOPE 25 X (OPTIONAL AT EXTRA COST)
Price : 12000 INR
IMPACT TESTING MACHINE FOR IZOD,CHARPY & AMP; TENSION IMPACT TEST
close
IMPACT TESTING MACHINE FOR IZOD,CHARPY & AMP; TENSION IMPACT TEST
STSOM-19
SPECIFICATIONS: The Pendulum is mounted on antifriction bearings It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen; the measurement is read from the maximum pointer on the dial scale. Charpy Test: The sample to be tested is kept on support anvils that are typically made from Alloy Steel. These anvils are fitted on the base of the machine. There is also an end stopper that holds the sample in a central position between the support anvils. Izod Test: The Izod test piece is clamped vertically in Izod support anvils, fitted at the foot of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & Allen screw enable clamping of the test piece at correct height with the help of Izod setting gauge The highly strained & wearing parts like support blocks & strikers are of special alloy steels duly heat treated Safety guard for the user is provided. Initial potential energy for Charpy is 300 Joules & for Izod is 170 Joules with a Least Count of 2 Joules (for Analogue models) & resolution of 0.5 Joules (for Digital Model).
Price : 45000 INR
SPECIMEN LEVELLER
close
SPECIMEN LEVELLER
STSOM-18
SPECIFICATIONS: High performance Seamless finish Cost-effective Optimality Accuracy
Price : 5000 INR
LOAD CELLS & DYNAMOMETER
close
LOAD CELLS & DYNAMOMETER
STSOM-17
SPECIFICATIONS: Capacity 1-1000ton Material MS Type Digital
Price : 5000 INR
WIRE WRAPPING TESTING MACHINE
close
WIRE WRAPPING TESTING MACHINE
STSOM-16
SPECIFICATIONS: Special system for easy loading and unloading. Packaging tension is adjustable by special breaker. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically. Widely packing material applicable. Special brake for the tape release device to avoid material folding.
Price : 35000 INR
BENDING TESTING APPARATUS
close
BENDING TESTING APPARATUS
STSOM-15
SPECIFICATIONS: Material SS Shape Cylinder Diameter 3/8 to 1 Inch
Price : 15000 INR
TORSION TESTING MACHINE FOR WIRES & AMP; ROAD(MANUAL & AMP; ELECTRICALLY OPERATED)
close
TORSION TESTING MACHINE FOR WIRES & AMP; ROAD(MANUAL & AMP; ELECTRICALLY OPERATED)
STSOM-04
SPECIFICATIONS: Torsional Speed 0.1/0.2 RPM Material Metal Torque Capacity 100 to 3000 Nm Power 220 V+/- 10%, 50 Hz Control Manual Weight 800 kg
Price : 50000 INR
POLISHING MACHINE ,SINGLE,DOUBLE & AMP; TRIPAL DISCS MODAL
close
POLISHING MACHINE ,SINGLE,DOUBLE & AMP; TRIPAL DISCS MODAL
STSOM-07
The speed of disc can be continuously varied from 350 to 1200rpm. A metallic reservoir is also provided for dropping water on the specimen. The machine is electrically operated suitable for operation on 220/230 volts single phase A.C, supply The machines are made in single. Double and three disc model
Price : 15000 INR
MOUNTING PRESS HYDRAULICALLY-OPERATED
close
MOUNTING PRESS HYDRAULICALLY-OPERATED
STSOM-06
FEATURES: • Corrosion resistant steel cabinet with built in Hydraulic system • Manual operation system • Digital Temperature indicator & digital timer • Stainless steel body pressure gauge system • 1500 Watt, single phase Mould Heater • Water cooling system (manual) • Wide range of sample sizes can be accommodated • Quick heater for speedy operation • Box Dimension: 32”X25”X29” • Gross weight: 105Kg
Price : 30000 INR
ROCKWELL HARDNESS TESTER
close
ROCKWELL HARDNESS TESTER
STSOM-03
Test Loads (kgf) 60, 100, 150 Rockwell Initial Loads (kgf) 10 Max. Test Height (mm) 215 Max. Depth of Elevating Screw Below Base (mm) 230 Machine Height(mm) 635
Price : 30000 INR
UNIVERSAL TESTING MACHINE, CAP :10 TONNES TO 100 TONNES
close
UNIVERSAL TESTING MACHINE, CAP :10 TONNES TO 100 TONNES
STSOM-01
DESCRIPTION: The Universal Testing Machine Digital provide a relatively inexpensive way for Determining the Tensile, compression, shear strength and elongation of a variety of raw materials such as metals, rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on the constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed. The load exerted on the stationary grip indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, and auto calibration. The frame of the tester fabricated from mild steel to give the required rigidity and strength. Various built-in safety arrangements such as over travel protection are provided. The tester is finished in metallic paint/powder coated and bright chrome/ zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied with electrical, which include micro-, switches. Push buttons, and contractors for safe and convenient operation. Other accessories such as slab moulding dies, specimen cutting dies, and specimen cutting presses are also offered as optional accessories. SPECIFICATIONS: Range – 20000 kg × 1 kg least count 10000 kg × 1 kg least count 5000kg × 1 kg least count Speed Variable 1 to 10 mm/min Variable 1 to 10 mm/min Variable 1 to 10 mm/min Motor 3 Hp, 415, 3 phase induction motor 2 Hp, 415, 3 phase induction motor 2 Hp, 415, 3 phase induction motor Power required 415 V AC, 3500 W, three phase
Price : 60000 INR
MUFFLE FURNANCE & AMP; HOT AIR DRYING OVENS
close
MUFFLE FURNANCE & AMP; HOT AIR DRYING OVENS
STSOM-11
DESCRIPTION: It consists of:- Temperature Thermostatically controlled by hydraulic thermostat from 50°C to 250°C with a sensitivity of +/- 1°C in Bare Oven. Beaded heating elements are placed in ribs at the bottom and sides. Thermometer Which is built in L-shape. Inside made of Aluminum or Stainless Steel with Double walled, outside mild steel sheet painted with attractive stove enamel with adjustable wire mesh nichol plated trays, On/off Rocker switch with Indicator ° Thermostat Indicator, to work on 220/230 Volts A.C.
Price : 20000 INR
ERICHSEN CUPPING TESTING MACHINE
close
ERICHSEN CUPPING TESTING MACHINE
STSOM-10
FEATURES: The following three kinds of test specimens are used in ordinary tests: 70-90 mm wide metal trip sheet  70-90 mm square sheet 70-90 mm dia. circular sheet SPECIFICATIONS: Width of sample: 70-90 mm  Thickness of sample: 0.1-2 mm Least count: 0.01 mm Overall Dimensions ( approx): 450x500x500 mm Net weight (approx): 20 kg.
Price : 35000 INR
CARBON AND SULPHER –IN-STEEL DETERMINATION APPARATUS
close
CARBON AND SULPHER –IN-STEEL DETERMINATION APPARATUS
STSOM-09
SPECIFICATIONS: Different Range of Carbon Burette Available:- 0.25%, 0.5%, 1.5%, 4.5%
Price : 40000 INR
FATIGUE TESTING MACHINE FOR MATERIALS (CONTILEVER ROTATING BAR TYPE)
close
FATIGUE TESTING MACHINE FOR MATERIALS (CONTILEVER ROTATING BAR TYPE)
STSOM-08
Power Source Phase Electric Single Phase Automation Grade Testing dia of specimen Semi-Automatic 8mm Rotating speed Power required 4200 rpm 0.5 H.P
Price : 35000 INR
LEAF SPRING TESTING MACHINE
close
LEAF SPRING TESTING MACHINE
STSOM-04
SPECIFICATIONS: Maximum Capacity 60 (kN) First Range 0 - 60 (kN) Least Count 0.1 (kN) Second Range 0 - 30 (kN) Third Range 0 - 18 (kN) Ram Stroke 200 mm Clearance Between Columns 450 mm Width Of Recorder Chart 150 mm Connected Load HP 1.5 Voltage 440 V Phase 3
Price : 45000 INR
Digital Electro Mechanical Universal Testing Machine
close
Digital Electro Mechanical Universal Testing Machine
32
Power Supply : Electricity
Voltage : 220-440 Volt (v)
Material : MS
Usage : Industrial
Supply Ability : As per the order Received Per Month
Price : 200000 INR
TENSILE TESTING MACHINES, CAP : 250 Kg TO 10 TONNES
close
TENSILE TESTING MACHINES, CAP : 250 Kg TO 10 TONNES
STSOM-02
Load Capacity 100 Kg 250 kg 500 kg. 1000 kg. 2500 kg.
Price : 60000 INR
EXTENSOMETERS (MECHANICAL & AMP; ELECTRONIC)
close
EXTENSOMETERS (MECHANICAL & AMP; ELECTRONIC)
STSOM-12
SPECIFICATIONS: Measuring Range 0 to 3 mm Guage Length 30 to 120 mm Thickness or diameter of specimen 1 to 20 mm Dimensions 120 x 50 x 150 mm Net Weight 0.3 kg
Price : 15000 INR
FAUNDRY (MOULDING) SAND TESTING EQUIPMENTS
close
FAUNDRY (MOULDING) SAND TESTING EQUIPMENTS
STSOM-13
SPECIFICATIONS: Width: 115 Depth: 40 Height: 165 Range: 0-100 Nos.
Price : 8000 INR
SPRING TESTING MACHINE, CAP: 1Kg TO 20.000K
close
SPRING TESTING MACHINE, CAP: 1Kg TO 20.000K
STSOM-14
SPECIFICATIONS: Material Stainless steel Power Source Electric Type Analog Measuring range 0 to 3 mm Least count 1/100 mm Capacity 200 kg
Price : 35000 INR


Back to top
SUPERB TECHNOLOGIES All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.