_CATEGORY_NAME__ Manufacturer,Exporter,Supplier

(SHT 19)

Unsteady State Heat Transfer Unit

Price: 30000 INR

Water Bath: Material - stainless steel Capacity-8 lit. (Approx.) Stirrer for Bath: Stainless Steel Impeller with shaft coupled to a FHP motor. Heater : Nichrome wire heater Test Cylinder: One each of Stainless Steel & Brass. Control Panel comprises of : Digital Temperature Controller: 0-199.90C, (For Water Bath) Digital Temperature Indicator: 0-199.90C, Temperature Sensors: RTD PT-100 type With Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 1 kW. Bench area of 1.5 m x 1.5 m.

Send Inquiry

Ask A Question

(SHT 18)

Heat Transfer in Agitated Vessel

Price: 30000 INR

System : Steam to Water Vessel : Material stainless steel fitted with 4 baffles Dia. 250, Depth 350 mm (Approx.) Jacket : Width 25 mm. Insulated with ceramic wool and cladded with aluminium foil. Helical Coil: Material Copper, OD 16mm, ID 13mm. Agitator: Stainless steel Impeller fitted on a shaft coupled to a variable Speed motor and Drive. Condensate Measurement: Measuring Cylinder & Stopwatch Water Flow Measurement: Rota meter. Steam Generator: Made of stainless steel fitted with level indicator, pressure Gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil. Heaters: Nichrome wire heater (2 Nos.) Control panel comprising of: Digital Temp. Controller: 0-199.90C (For Steam Generator) Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type. RPM Indicator: Standard makes Digital, Non Contact type. With standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Water supply 20 lit/min (approx.) and Drain. Electricity Supply : 1 Phase, 220 V AC, 5 kW

Send Inquiry

Ask A Question

(SHT 17)

Vertical & Horizontal Condenser Apparatus

Price: 30000 INR

System : Steam to Water Condensers: 2 Nos. (Vertical & Horizontal) Insulated by Ceramic wool and cladding by aluminium foil. Shell : Material stainless steel.Inner Dia 100 mm, Length 500 mm (Approx.) Tubes : OD 12.7mm, Length of tubes 500mm Condensate Measurement : Measuring Cylinder & Stopwatch Water Flow Measurement : Rotameter Steam Generator: Made of stainless steel fitted with level indicator, pressure gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil. Heaters: Nichrome wire heater (2 Nos.) Control panel comprising of: Digital Temp. Controller: 0199.90C (For Steam Generator) Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type. With Standard make On/Off switch, Mains Indicator etc. Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts SERVICES REQUIRED Water supply 20 lit/min (approx.) and drain. Electricity Supply: 1 Phase, 220 V AC, 4 kW. Floor area of 1.5 m x 1m.

Send Inquiry

Ask A Question

(SHT 24)

Plate Type Heat Exchanger

Price: 30000 INR

System : Water to Water Plates : Material Stainless Steel Frame : Rigid MS Structure Water Flow Measurement :By Rotameter (2Nos.) one each for cold & hot fluid. Hot Water Tank:Made of Stainless steel ,Double Wall, Insulated with ceramic wool. Hot Water Circulation: Magnetic Pump. Heaters : Nichrome wire heater. Control panel comprising of: Digital Temp. Controller: 0-199.9°C,(For Hot Water Tank) Digital Temp. Indicator : 0-199.9°C,withmulti-channel switch Temperature Sensors : RTDPT-100 type.-4Nos. With Standard make On/Off switch, Mains Indicator etc. An ENGLISH instruction manual consisting of experimental procedures ,block diagram etc .will be provided along with the Apparatus SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 5 KW. Water Supply at constant head (10LPM Approx.) Floor Drain Floor area of 1.75m x 1m.

Send Inquiry

Ask A Question

(SHT 22)

Single effect Evaporator

Price: 30000 INR

Evaporator : Material stainless steel Shell Dia - 75mm, Length - 750mm, Tubes Dia - 12mm, Length - 750mm Feed Circulation : By Gravity feed Feed Tank: Material stainless steel, Capacity 25 Ltrs. Flow Measurement: Rotameters (One each for feed & cold water). Steam Generator: Made of stainless steel provided with Pressure Gauge & Level Indicator, Safety valve and drain etc. & insulated with ceramic wool and cladding with Aluminium foil. Piping: Stainless Steel and PVC, size ¼”. Condenser: Shell & Tube type made of Stainless Steel. Bottom Product Tank: Made of Stainless Steel, capacity 10 Ltrs. Water Supply Tank: Made of Stainless Steel, capacity 50 Ltrs. For condenser Pump : FHP capacity Heaters: Nichrome wire heater. Control panel comprises of Digital Temp. Controller: 0-199.90C, (For Steam Generator) Digital Temp. Indicator: 0-199.90C, with multi-channel switch. Temp. Sensors: RTD PT-100, Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged on a good quality painted structure SERVICES REQUIRED Water supply 5 lit/min (approx.) and Drain. Electricity Supply: 1 Phase, 220 V AC, 4 kW. Required Chemicals.

Send Inquiry

Ask A Question

(SHT 20)

Open Pan Evaporator

Price: 30000 INR

Evaporator: Hemi-spherical, Jacketed type, made of stainless Steel insulated from outside. Dia. 300 mm approx. Steam Generator: Made of stainless steel, provided with Pressure Gauge & Level Indicator, Safety valve and drain etc. & insulated with ceramic Wool and cladding With Aluminium foil. Condensate Measurement: Using Measuring Cylinder & Stop watch. Temp. Measurement: By RTD Pt-100 Sensor Special arrangement to measure the evaporated volume of solvent is done. Control panel comprises of : Digital Temp/ Controller: 0-199.90C, (For Steam Generator) Digital Temp. Indicator: 0-199.90CWith Standard make On/Off switch, Mains Indicator etc. Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure. SERVICES REQUIRED Water Supply. Drain. Electricity Supply : 1 Phase, 220 V AC, 5 kW. Required Chemicals

Send Inquiry

Ask A Question

(SHT-16)

Finned Tube Heat Exchanger

Price: 30000 INR

System : Water to Water, concentric tube type Inner Tube : Dia 32 mm approx., Length 500mm. (Made of Stainless Steel) Longitudinal Fins: Width 20mm, Length 500mm, 6 Nos. (Made of Stainless Steel) Water Flow Measurement : Rotameters for hot and cold fluid Hot Water Tank: Made of Stainless steel Double Wall, insulated with ceramic Wool. Hot Water Circulation: Magnetic Pump made of Polypropylene to circulate Hot water Maximum working temperature is 85°C. Heaters: 2 kW Nichrome wire heater (2 Nos.) Control panel comprising of: Digital Temp. Controller: 0-199.90C. (For Hot Water Tank) Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type. With Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 2 kW. Table for set-up support.

Send Inquiry

Ask A Question

(SHT 13)

Dropwise & Filmwise Condensation Apparatus

Price: 30000 INR

Steam Generator : 8 Ltrs. (Approx.) made of Stainless steel with 1.5 kW heater. Insulated with ceramic wool and cladded by aluminum foil. Pressure Gauge : Bourdon type. Copper tubes (2 Nos.): one with natural finish and other nickel polished. Diameter: 19 mm (Approx.) Length: 170 mm (Approx.) Water Flow measurement: Rotameter. Condensate Measurement : Measuring Cylinder & Stopwatch Control valves: one each for Steam, Cooling water & Drain. Control panel comprising of : Digital Temp. Controller: 0- 199.90C (For Steam Generator) Digital Temp. Indicator: 0-199.90C, with multi-channel switch. Temperature Sensors : RTD PT-100 type. With Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Water supply 5 lit/min (approx.) Electricity Supply: 1 Phase, 220 V AC, 1.5 kW. Table for set-up support.

Send Inquiry

Ask A Question

(SHT 12)

Stefan Boltzmannâs Apparatus

Price: 30000 INR

Hemisphere : Dia.- 200 mm (approx.) made of Copper Jacket: Dia. 250 mm (approx.) made of Stainless Steel Test Disc Size : 20 mm Dia. x 1.5-mm thickness made of Copper Water Tank: Stainless steel 12 Ltrs. cap. Heater: Nichrome wire immersion heater. Control panel comprising of Digital Temp. Controller: 0 to 199.90C, (for water tank) Digital Temp. Indicator: 0 to 199.90C, with multi channel switch Temperature sensors: RTD PT-100 type. With standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged on a powder-coated structure. SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 2 kW. Table for set-up support

Send Inquiry

Ask A Question

(SHT-15)

Shell & Tube Heat Exchanger

System: Water to Water. (1 – 2 shell & tube type) Shell. : Material Stainless steel. Insulated with ceramic wool and cladded with aluminum foil. Dia. 220 mm, Length 500 mm (Approx.) 25% cut baffles at 100 mm distance 4 Nos. Tube: OD 16mm approx., Length 500mm (24 Nos.) Water Flow Measurement: Rota meters (2Nos.) one each for cold & hot fluid. Hot Water Tank: Made of Stainless steel Insulated with ceramic fibre wool. Hot Water Circulation : Magnetic Pump Heaters: Nichrome wire heater (2 Nos.) Control panel comprising of: Digital Temp. Controller: 0-199.90C, (For Hot Water Tank) Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type. With Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts. SERVICES REQUIRED Water supply 20 lit/min (approx.) and drain. Electricity Supply: 1 Phase, 220 V AC, 4 kW. Floor area of 1.5 m x 0.75 m.

Send Inquiry

Ask A Question

(SHT 14)

Parallel & Counter Wise Flow Heat Exchanger

System : Water to Water, concentric tube type Heat Exchanger: Length 1.6m (approx.). insulated with ceramic wool and cladded by aluminum foil. Outer Tube: Material Stainless steel. ID 27.5mm, OD 33.8 mm (approx) Inner Tube : Material Stainless Steel, OD 12.7mm (appx) Water Flow Measurement: Rotameters (2Nos.) one each for cold & hot fluid. Hot Water Tank: Made of Stainless steel. Insulated with ceramic fiber wool. Hot Water Circulation : Magnetic Pump Heaters : Nichrome wire heater (2Nos) Control panel comprising of Digital Temp. Controller: 0-199.90C (For Hot Water Tank) Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With Standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts. SERVICES REQUIRED Water supply 10 lit/min (approx.) and drain. Electricity Supply: 1 Phase, 220 V AC, 3 kW. Floor area 2 m x 0.6m

Send Inquiry

Ask A Question

(SHT 10)

Heat Transfer in Natural Convection

Price: 30000 INR

Test Section Diameter: 38 mm (approx). Length: 500 mm (approx). Heater: Nichrome Wire. Control panel comprising of : Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp. Variac: 0-230 V, 2 Amp. Digital Temp. Indicator: 0-3000C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Powder coated duct of MS to accommodate the assembly with front window of Acrylic. The whole set-up is well designed and arranged on a powder-coated structure

Send Inquiry

Ask A Question

(SHT 07)

Emissivity Measurement Apparatus

Price: 30000 INR

Table for set-up support. Test plate Diameter : 160 mm (approx.) Black Plate Dia. : 160 mm (Approx.) Heater (2Nos.): Nichrome Wire Heater. (One each for test plate & black plate) Control panel comprising of Digital Voltmeter. : 0-300 Volt. Digital Ammeter. : 0-2 Amps. DPDT Selector switches: For Digital Voltmeter & Digital Ammeter. Variacs: 0-230 V, 2 Amps, (2 Nos.) (One each for test plate and black plate). Digital Temp. Indicator: 0-3000C, with multi-channel Switch Temperature Sensors: RTD PT-100 type. With standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Cabinet to accommodate the slab assembly with front window of glass/acrylic. The whole set-up is mounted on a powder coated base plate. SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 4 Amp.

Send Inquiry

Ask A Question

(SHT 08)

Heat Transfer Through Pin-fin Apparatus

Price: 30000 INR

Fin: Pin type. Material: Brass. Size: 12.5 mm (approx.) 15 cm. long (approx.). Duct: Made of MS. Fan: Standard makes. Heater: Band type, Nichrome Wire. Control panel comprising of: Dimmerstat: 0-230 V, 2 Amp. Digital Temp. Indicator: 0-3000C, with multi-channel switch Temperature Sensors: RTD PT-100 type.5 for pin and 1 for duct temperature. With standard make On/Off switch, Mains Indicator etc. Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is mounted on a powder coated base plate.

Send Inquiry

Ask A Question

(SHT 09)

Heat Transfer In Forced Convection Apparatus

Price: 30000 INR

Test section : Horizontal, externally heated Diameter: 28 mm (approx.) Length: 400 mm (approx.) Blower: FHP of Standard makes. Heater: Nichrome Wire. Air Flow measurement: Orifice meter & Manometer. Control panel comprising of: Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp. Variac: 0-230 V, 2 Amps Digital Temp. Indicator: 0-3000C, with multi-channel switch. Temperature Sensors: RTD PT-100 type. With standard make on off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts

Send Inquiry

Ask A Question

(SHT 07)

Thermal Conductivity Of Liquids

Price: 30000 INR

Liquid Chamber: Dia 160 mm (approx). Heater: Dia 100 mm sandwiched between copper plates. Insulation : Ceramic Wool Cooling chamber: Made of Aluminium for water circulation. Control panel comprising of: Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp. Variac : 0-230 V, 2 Amp. Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Valves are provided for drain, charging & overflow line to make system flexible. MS Cabinet to accommodate the slab assembly. The whole setup is mounted on a powder coated base plate.

Send Inquiry

Ask A Question

(SHT 06)

Thermal Conductivity Of Insulating Slab

Price: 30000 INR

Specimen Diameter: 180 mm (approx). Thickness: 12 mm (approx). Central Heater: Dia 100 mm, sandwiched between copper plates. Ring Guard Heater: Width 35 mm, sandwiched between copper rings. Cooling chamber: Made of Aluminium for water circulation. 2 Nos. Insulation: Ceramic wool Control panel comprising of: Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp Variac: 0-230 V, 2 Amps, (2 Nos.) One each for central & ring guard heater. Digital Temp. Indicator: 0199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make on off switch, Mains Indicator etc. Instruction Manual: An ENGLISH instruction manual will be provided along With the Apparatus MS Cabinet to accommodate the slab assembly. The whole setup is mounted on a powder coated base plate

Send Inquiry

Ask A Question

(SHT 05)

Thermal Conductivity Of Metal Rod

Price: 30000 INR

 Metal Bar  Material: Copper  Length: 400 mm (approx.)  Diameter: 25 mm Insulating shell  Length : 250 mm  Diameter : 200 mm Cooling Water Jacket  Length : 75 mm  Diameter : 100 mm  Heater: Nichrome Wire.  Water Flow measurement: By Measuring cylinder  Control panel comprising of Digital Voltmeter: 0-300 Volt. Variac : 0-230 V, 2 Amps. Digital Temp. Indicator: 0-199.90C, with multi-channel switch,  Temperature Sensors: RTD PT-100 type. With standard make on/off switch, Mains Indicator etc.  Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus  The whole setup is mounted on a powder coated base plate.

Send Inquiry

Ask A Question

(SHT 03)

Heat Pipe Demonstrator

Price: 30000 INR

Pipes : 1st : Heat pipe made of stainless steel 2nd: Made of copper. 3rd: Made of Stainless steel Size: 32mm dia, 350 mm length (Approx.) Heat Sink: Material Stainless steel. Working fluid in heat pipe: Distilled water. Heaters: Nichrome Wire Band Type. Control panel comprising of Digital Voltmeter: 0-300 Volts. Digital Ammeter: 0-2 Amp. Variac : 0-230 V, 4 Amp. Digital Temp. Indicator: 0-2000C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make on/ off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a Powder Coated Base plate

Send Inquiry

Ask A Question

(SHT 04)

Thermal Conductivity Of Insulating Powder

Price: 30000 INR

Inner Sphere: Dia. - 100 mm. Outer Sphere : Dia. - 200 mm. Heater: Nichrome Wire. Control panel comprising of: Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp. Variac: 0-230 V, 2 Amps. Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make On/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a power coated base plate

Send Inquiry

Ask A Question

(SHT-01)

Heat Transfer through composite Wall

Price: 30000 INR

 Slab assembly arranged symmetrically on both sides of heater. Slab Material: Slab Size Cast Iron : 250 mm dia. & 20mm thick. Bakelite: 250 mm dia. & 15 mm thick. Press Wood : 250 mm dia. & 12 mm thick.  Heater: Nichrome wire.  Control panel comprising of Digital Voltmeter: 0-300 Volts. Digital Ammeter: 0-2 Amp. Variac : 0-230 V, 2Amp. Digital Temp. Indicator: 0-2000C, with multi-channel switch Temp. Sensors: RTD PT-100 type. With standard make On/off switch, Mains Indicator etc.  Instruction Manual : An ENGLISH instruction manual will be provided along  with the Apparatus  Cabinet to accommodate the slab assembly with front window of glass/acrylic.  The whole set-up is mounted on a powder coated base plate

Send Inquiry

Ask A Question

(SHT 02)

Heat Transfer through Lagged Pipe

Price: 30000 INR

 G.I. Pipe Inner: 5 cm dia. Approx.  G.I. pipe middle: 10 cm dia. Approx.  G.I. Pipe outer: 15 cm dia. Approx.  Length of Pipes: 60 cm Approx.  Heater : Nichrome Wire  Control panel comprising of: Digital Voltmeter: 0-300 Volt. Digital Ammeter: 0-2 Amp. Variac : 0-230 V, 2 Amp, Digital Temp. Indicator: 0-2000C, with multi-channel switch. Temperature Sensors: RTD PT-100 type. With standard make On/Off switch, Mains Indicator etc.  Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus

Send Inquiry

Ask A Question

Heat Transfer Lab