General Testing Lab Equipment

WILEY MILL, HEAVY DUTY

SPECIFICATIONS: The milling chamber is of 200mm. diameter x 75mm. deep. Four steel blades on the rotor. Act in conjunction with six steel blades on the frame. A hopper, provided for feeding the material, has a throat diameter of 14mm. Samples introduced through the hopper are swept around the rotor, until cut to sufficient fineness, to pass through the sieve top, and then on the delivery tube, which forms the bottom of the chamber. The mill is supplied with three standard size sieves of 0.5mm, 1mm. and 2mm. A glass jar plate forms the face of the chamber and permits observation during the operation. By removing the glass, access is possible for cleaning. Supplied complete with a glass receiver, a wrench for adjusting fixed blades and a cleaning brush., an electrical chord and plug. Wired for 440V. 50 Hz. 3ph.

WILEY MILL

SPECIFICATIONS: It Consists of a polished cast iron chamber for 40mm. diameter x 22mm. deep, with two stationary blades. A rotor with four blades revolves at high speed, to provide a unique shearing action. A hopper, provided for feeding the material, has a throat diameter of 14mm. Samples introduced through the hopper are swept around the rotor, until cut to sufficient fineness, to pass through the sieve top, and then on the delivery tube, which forms the bottom of the chamber. • Three sieves of mesh sizes BSS20, 40 & 60 are supplied. • A glass jar, placed at the bottom, received the milled powder. • A glass jar plate forms the face of the chamber and permits observation during the operation. By removing the glass, access is possible for cleaning. • Supplied complete with a glass receiver, a wrench for adjusting fixed blades and a cleaning brush. Complete with a 0.25 HP motor, an electrical chord and plug. Wired for 230 V. 50 Hz. Sph.

HUMIDITY CONTROL OVEN DIGITAL DISPLAY (ENVIRONMENTAL TEST CHAMBERS)

SPECIFICATIONS: Internal Dim. In cms. (HxWxD) Inner Chamb. Temp. Range 0 Accuracy = 1 C Humidity Range Accuracy +3%RH 0 0 between to 10 C to 60 C (a) 70x50x50 x Aluminum 10 C above 0 ambien to 60 C Ambiedn to 95%RH (b) -do- Stainless Steel -Do- -Do- (c) -do- Aluminum 10 Cl to 60 C 40% to 90% (d) -do- Stainless Steel -do- -do- (e) -do- -do- 0 C to 60 C

DIAL GAUGE

SPECIFICATIONS: Available models: (a) 0.01 x 25mm, (b) 0.002 x 5mm (c) 0.01 x 50mm.

SOIL THERMOMETER

SPECIFICATIONS: Soil thermometer are available in following sizes:- • 5cm long, • 10 cm long, • 15cm long • 230cm long.

TRAYS

G.I. Trays Enamel Trays Approximate Size: Sizes available in inches are as Under: Under: (a) 6” x 6” (b) 8” x 8” (c) 10” x 12” (d) 12” x 12” (e) 12” x 14” (f) 12” x 18” (g) 18” x 18” (h) 18” x 24” (i) 24” x 24” (a) 6” x 6” (b) 8” x 8” (c) 10” x 12” (d) 12” x 12” (e) 12” x 14” (f) 12” x 18 (g) 18” x 18” (h) 18” x 24” (i) 24” x 24”

DEAD WEIGHT TESTERS

SPECIFICATIONS: Dead Weight Tester • 2 Pressure Range: 6-75kg./cm. Dead Weight Tester • 2 Pressure Range: 100-550kg./cm. Dead Weight Tester • 2 Pressure Range: 600-800kg./cm. Dead Weight Tester • 2 Pressure Range: 800-1000kg./cm.

THERMOSTATIC HOT AIR OVEN (BOTTOM HEATING)

SPECIFICATIONS: Inner chamber Shelves Wattage (a) 12” x 12” x 12” (b) 14” x 14” x 14” (c) 18” x 18” x 18” (d) 20” x 20” x 20” (e) 24” x 24” x 24” (f) 24” x 24” x 36” 1 2 2 3 3 3 800 1000 1500 2200 2500 3000

VISCOMETRIC WATER BATH

SPECIFICATIONS: • Available in the following sizes and accessories :- (A) 12”L x 9” W x 7”H having rating of 750 W., (B) 18” L x 12”W x 7”H having rating 1500W. • A glass window on side in water bath.

CONSTANT TEMPERATURE WATER BATH WITH CIRCULATING PUMP

• Control panel for heaters, thermostat and circulating pump are provided on the outer wall at a convenient place, working size 37.5c, L x 30cm W x 25cm H. inside S.S.,. outside M.S. rating 2Kw, suitable for 230volts AC, single phase.

CONSTANT TEMPERATURE WATER BATH WITH CIRCULATING PUMP

DESCRIPTION: • Run by a FHP motor and a contact thermometer to control accurately temperature within + .5 C, Heating is by permanent heater and one booster heater accommodated inside the reservoir. • Control panel for heaters, thermostat and circulating pump are provided on the outer wall at a convenient place, working size 37.5c, L x 30cm W x 25cm H. inside S.S.,. outside M.S. rating 2Kw, suitable for 230volts AC, single phase.

UNIVERSAL WATER BATH

SPECIFICATIONS: Available in the following sizes and accessories : (a) 12”L x 9” W x 7”H having rating of 750 W., (B) 18” L x 12”W x 7”H having rating 1500W. 1. Pyramid lid for size (a) 12” L x 9” W x 7” H, (b) 18” L x 12”W x 7”H.

WATER BATH

DESCRIPTION: • Rectangular water bath, double walled construction, inside reservoir of stainless steel, outer body mild steel with insulation in between, supplied with lid having one hole of 12.5cm dia. and four holes of 7.5cm dia. • Concentric Rings with lids are provided on holes. • The top plate and concentric rings are of S.S. Temperature 0 0 0 range 7 C above ambient to 95 C + 1 C by capillary thermostat, inside chamber size 30cm x 25cm x 12cm. • These water baths are useful for Laboratory work. • Thermometers at extra cost suitable for 230volts AC, ingle phase.

SCOOPS

SPECIFICATIONS: Capacity available (a) 100gms, (b) 200gms, (c) 500gms (d) 1000gms. Scoops are made from G.I Sheet also available in above capacities.

LABORATORY OVEN

• The heating if form bottom heaters made of nichrome wire, temperature range 50 C to 240 C accurately controlled within + 2 C thermostatically. • A three heat control switch provides faster initial heating. Suitable for operation on 230volts, A.C. single phase.

DIAL THERMOMETER

SPECIFICATIONS: Following sizes are available: A. Range 0-300 C with 4” dial and 10mm dia. x 300mm long, S,S.Stem. B. Range 0-300 C with 2.1/2” dial and 6mm dia. x 180/200/300mm long, S.S. Stem. C. C. Range 0-100 C with 2.1/2” dial and 6mm dia. x 200mm long, S.S.Stem.

Universal Water Bath

MEASURING TAPES

SPECIFICATIONS: Steel Tape: (a) 15 meter, 13mm width, (b) 15 meter, 9.5mm width, (c) 30meter, 13mm width, (d) 30meter, 9.5mm width, (e) 3meter, 9.5mm width, (f) 5meter, with bubble, Metallic wire braided, (g) 15meter , (h) 30meter.

LABORATORY THERMOMETER

SPECIFICATIONS: Length of each Thermometer are 30cm in following range: 1. 50 C 1/1, 2. 110 C 1/1, 3. 100 C 1/2, 4. 150 C 1/1, 5. 250 C 1/1, 6. 360 C 1/1, 7. 400 C 2/1, 8. 220 F 1/1 and